Cibiyar Injin Tsaye VMC850
ABUBUWAN CIBIYAR INJI TA TSAYA:
1. Fuselage da manyan abubuwan haɗin ƙarfe ne masu ƙarfi, kwanciyar hankali na tsarin microstructure, tabbatar da cewa
kwanciyar hankali na kayan aikin injin don amfani na dogon lokaci.
2. Ginshiƙin da ke ƙasan tsarin nau'in gadar A, tare da babban tushe na akwati, sosai
rage girgizar na'ura akan yankewa mai nauyi
3. Tuƙin sukurori na ƙwallon da aka riga aka yi amfani da shi
4. Na'urar juyawa mai sauri, daidaito, da kuma taurin kai mai ƙarfi
5. Tsarin raba mai da ruwa
6. Man shafawa na atomatik na ɗan lokaci
7. Tsarin wuka mai kaifi ta atomatik
Aikace-aikace:
Ana iya amfani da cibiyar injina ta tsaye a fannoni da yawa kamar sarrafa injina da mold
masana'antu, waɗanda suka dace daga ƙaiƙayi zuwa buƙatun sarrafa ƙarewa, suna da halaye na
babban daidaito, babban inganci, ana amfani da shi sosai a cikin sararin samaniya, masana'antar soja, ƙira, mota,
injunan konewa na ciki, injunan yadi, sarrafa injunan sinadarai, mai, kayan lantarki da sauran masana'antu.
BAYANI:
| BAYANI | RAKUNAN | VMC850 |
| Tafiya ta X-axis | mm | 900 |
| Tafiya axis na Y | mm | 550 |
| Tafiya axis na Z | mm | 550 |
| Girman tebur | mm | 1100 × 500 |
| Matsakaicin nauyin tebur | kg | 500 |
| Ramin T (lambar rami × faɗi × fili) | mm | 5-18-100 |
| Ƙarfin dogara sanda | kw | 7.5 |
| Matsakaicin gudun dogara sanda | rpm | 8000 |
| Hanyar tafiya mai sauri (X/Y/Z) | mm/min | 18000 |
| Yanke abinci | mm/min | 1-6000 |
| Hanci zuwa teburi na dogara da sandar | mm | 130-680 |
| Layin dogo na nesa tsakanin sandar zuwa saman shafi | mm | 540 |
| Matsakaicin diamita na kayan aiki | mm | Φ130 |
| Tsawon kayan aiki mafi girma | mm | 300 |
| Matsakaicin nauyin kayan aiki | kg | 8 |
| Daidaiton matsayi | mm | ±0.008 |
| Daidaiton maimaitawa | mm | ±0.0075 |
| Nauyin injin | kg | 5800 |
| Girma | mm | 3600×2360×2500 |
