Lathe na Ƙasa na Mai QK1313
ABUBUWAN DA KE ƊAUKAR DA BUTUTU NA CNC:
Ana amfani da jerin lathe ɗin zaren bututun CNC na QK13 don sarrafa zaren bututu na ciki da na waje, da zaren awo, da zaren awo.
da zare mai inci, kuma yana iya yin ayyukan juyawa daban-daban kamar juyawa saman silinda na ciki da na waje,
saman mazugi da sauran juyin juya hali da kuma ƙarshen saman azaman lathes na CNC gabaɗaya
BAYANI:
| BAYANI NA YIMAKE LATHE INCHINE | |||||
| KAYAYYAKI | NAƘA | QK1313 CNC BututuLathe | |||
| Na asali | Max. Dia. yana jujjuyawa a kan gado | mm | Φ630 | ||
| Max. Dia. lilo a kan giciye zamewar | mm | Φ340 | |||
| Nisa tsakanin cibiyoyi | mm | 1500 / 3000 | |||
| Kewayon zaren injin | mm | Φ30-126 | |||
| Faɗin hanyar gado | mm | 550 | |||
| Babban injin | kw | 11 (kai tsaye) | |||
| Motar famfon sanyaya ruwa | kw | 0.125 | |||
| Dogayen sanda | Dogon sandar huda | mm | Φ130 | ||
| Saurin juyawar sanda (sauya mita) | r/min | Matakai 2: 30-200 / 200-600 | |||
| Sakon kayan aiki | Adadin tashoshin kayan aiki | -- | 4 | ||
| Girman sashen kayan aiki | mm | 32×32 | |||
| Ciyarwa | Motar servo ta Z axis | kw/Nm | GSK:2.3/15 | Fanuc: 2.5/20 | Siemens: 2.3/15 |
| Motar servo ta X axis | kw/Nm | GSK: 1.5/10 | Fanuc: 1.4/10.5 | Siemens: 1.5/10 | |
| Tafiya axis na Z | mm | 1250 / 2750 | |||
| Tafiya ta X axis | mm | 520 | |||
| Saurin wucewa mai sauri a cikin axis X/Z | mm/min | 4000 | |||
| Adadin ciyarwa da kuma girman dunƙule | mm | 0.001-40 | |||
| Daidaito | Daidaiton matsayi | mm | 0.020 | ||
| Daidaiton sake sanyawa | mm | 0.010 | |||
| Tsarin CNC | GSK | -- | GSK980TC3/GSK980TDC | ||
| Fanuc | -- | Fanuc Oi Mate TD | |||
| Siemens | -- | Siemens 808D | |||
| Tailstock | Diamita na bel ɗin ƙwanƙwasa | mm | Φ100 | ||
| Taper ɗin quill na Tailstock | ƙarin | m5# | |||
| Tafiya ta Quill ta Tailstock | mm | 205 | |||
| Tailstock Cross Travel | mm | ±15 | |||
| Wasu | Girma (L/W/H) | mm | 3660/5160×1360×1480 | ||
| Nauyin da aka ƙayyade (kg) | kg | 3800/4600 | |||
| Cikakken nauyi | kg | 4800/5600 | |||
| Kayan haɗi | Sakon kayan aiki | Saiti 1 | 4 matsayi na NC turret | ||
| Chuck | Saiti 2 | Φ400 mai muƙamuƙi uku da hannu | |||
| Hutu na tsakiya | Saiti 1 | Φ150 | |||
| Maƙallin tallafi na baya | Saiti 1 | Φ150 | |||
| Kunshin | Kunshin fitarwa na yau da kullun | Saiti 1 | Firam ɗin ƙarfe na ƙarfe da akwatin plywood | ||
